Setting up a PC700 Time Clock

 

The setup of a PC700 is a two-step process.  First you must add the PC700 time clock into PayClock Online. Secondly you would finish the setup at the PC700 time clock itself. Important Note: Record the serial number from the time clock.  You will need this in order to add the PC700 to PayClock Online.

 

  1. Select Clocks from the navigation list.
  2. From the slide out menu select Manage Clocks.
  3. Select the + New button.
  4. Select PC700 and choose + Select.
  5. Enter the serial number from the time clock in the Serial Number field.
  6. Enter an identifier for the time clock in the Device Nickname field.
  7. Select Save.
  1. Connect the power supply to the PC700 time clock.
  2. Plug in the power supply to an outlet and allow the time clock to boot up.
  3. Tap the Admin button.
  4. Tap in the PIN for the Admin and press enter. Please Note: By default the Admin PIN is 99999.
  5. Tap Network Setup.
  6. Tap Wifi.
  7. Select the access point you wish to connect to.
  8. Enter the password for the access point using the onscreen keyboard.
  9. Tap OK.
  10. Go back to the main menu screen using the back arrow until you see Sync Now at the top.
  11. Tap Sync Now.
  12. The time clock will connect to PayClock Online to download settings and employees.  Once complete it will go back to the home screen.

 

Wed 12/05/2018